Water or moisture is not desirable in the transmission lines of an air compression system. Water carried through the lines washes away lubricating oil from the tools the compressed air is running. This causes the tools to operate sluggishly & increases the need for maintenance. The effect is compounded in high speed tools, where wearing surfaces are limited in size & excessive wear reduces efficiency by creating air leakage.
Further problem results from the decrease of temperature caused by sudden expansion of air at the end. This low temperature creates condensation, which freezes around port and valves & impairs efficiency. These conditions can be minimized by removing the moisture from the air directly after compression, before the air enters the distribution system.
The compressed air discharged from compressor is hot. Compressed air at these temperatures contains large quantities of water in vapor form. As the compressed air cools this water vapor condenses into a liquid form. As an example if an after cooler is not used, a 200 scfm compressor operating at 100 psig introduces 45 gallons of water into the compressed air system each day.
You will get Aftercooler, Intercooler, and Oil Cooler for Atlas Copco, Chicago Pneumatic, Crepelle, Thome Crepelle, and ABC Air & Industrial Gas Compressor:
We can offer you all critical spares of OEM quality and standards. We stand for its unconditional guarantee for material manufacturing defects and performance which will be at Par with OEM supplies of Atlas Copco, Chicago Pneumatic, Crepelle, Thome Crepelle, ABC Air & Industrial Gas Compressor spares.
All manufacturer's names, numbers, symbols and description are used for reference purpose only and it is not implied that any part listed is the product of these manufacturers.
Leave a message
